Trapping Basics

How to Prepare New Traps: Cleaning, Boiling and Scent Removal

Before you set a new trap, inspect it, remove factory oil, clean and boil it, reduce human scent, and test its action. Step-by-step guidance for beginners.

On this page
  1. Why new traps need preparation
  2. Inspect the trap first
  3. Clean and remove factory oil
  4. Boil the trap
  5. Reduce human scent
  6. Test the trap’s action
  7. Store traps clean
  8. Safety and local rules
  9. Quick checklist

New traps need a little preparation before they go in the field. They often carry factory oil, dirt and the smell of the packaging, and handling them with bare hands leaves human scent behind. This guide covers the usual steps: inspect, clean, boil if appropriate, reduce scent, test, and store. Some of the methods described are common practice rather than settled rules, so check your local requirements as well.

Why new traps need preparation

Factory oil and grease help protect metal in shipping, but they can be left on the trap and may be noticeable to animals. Human scent from handling is also a common concern. Many trappers prepare new traps to reduce both. Preparation also gives you a chance to find damaged parts before you rely on the trap in the field.

Inspect the trap first

Before cleaning, check the trap for:

  • cracks, bends or rough edges, especially on jaws, frames and hinges
  • missing or weak springs
  • loose rivets, screws or welds
  • door latches and mesh on cage traps that do not close fully
  • pans and triggers that do not move freely

Replace or discard any damaged trap. A broken trap can injure an animal or fail to hold it.

Clean and remove factory oil

Remove packaging, tags and stickers. Scrub the trap in hot soapy water with a stiff brush, then rinse it well. Work the moving parts so that grit and grease come loose. Wear gloves while you clean, and avoid harsh solvents that leave a residue. If you use a degreaser, follow its label, and rinse thoroughly afterwards.

Boil the trap

Many trappers boil new metal traps in plain water to remove oil and some scent. Some add a natural dye or a product labelled for trap cleaning. Keep these points in mind:

  • Use a pot that you will not use for food.
  • Wear gloves and keep children and pets away from the pot.
  • Let the trap cool before you handle it, and handle hot water with care.
  • Do not boil traps with plastic, rubber or wooden parts unless the maker says it is safe, because heat can damage them.

Boiling is more common for metal traps and snares than for cage traps made of wood or plastic.

Reduce human scent

After cleaning and boiling, rinse the trap again and let it dry fully. Handle it with gloves from this point on, and try to avoid touching the bait pan, pan and trigger with bare hands. Some trappers keep traps in a clean, sealed bag or bin away from fuel, tobacco and other strong smells, which can linger on metal. Scent removal is never complete, so treat it as a way to reduce the problem rather than a guarantee.

Test the trap’s action

Test the trap before it goes in the field. Check that:

  • the jaws or door close fully and evenly
  • the pan or trigger moves freely and returns to its position
  • springs are strong and in good condition
  • nothing binds or rubs

Test foothold and body-grip traps with extreme care, because they can close hard on fingers. Use the trap’s own tools or a test method that keeps your hands clear. If you lubricate a moving part, use a light product, wipe off the excess, and keep it away from bait.

Store traps clean

Store traps dry and off the ground, in a sealed container or bag. Keep them away from pets and children, and away from chemicals and food. Label each trap with the owner’s details if your rules require identification.

Safety and local rules

Some areas regulate trap types, identification tags or the materials used on traps. Check your local rules before you clean or treat a trap in any unusual way. Keep cleaning products out of reach of children and pets, and dispose of them as the label directs.

Quick checklist

  • Inspect the trap for damage, and replace what is broken.
  • Remove packaging, tags and stickers.
  • Scrub and rinse to remove dirt and factory oil.
  • Boil metal traps in a dedicated pot, if appropriate for the trap.
  • Rinse, dry and handle with gloves from this point on.
  • Test the jaws, door, pan and springs without your hands in the way.
  • Store the trap clean, dry and off the ground.

Before you set your first trap, read how to start trapping for permission and licence steps. For the baits you will use with prepared traps, see how to use bait and lures in traps.

The complete guide to trapping basics

How to Start Trapping: A Beginner's Guide
Read the guide

Keep exploring

Guides from other topics

All topics →