Nuisance Animal Trapping

How to Trap Squirrels in an Attic Without Injuring Them

Remove squirrels from an attic humanely: check for babies first, install a one-way exit door, then seal every gap. Poison and glue traps cause serious harm.

On this page
  1. Check for babies first
  2. Find the entry points
  3. Method 1: One-way exit door (usually the best option)
  4. Method 2: Live cage traps
  5. Avoid poisons and glue traps
  6. Check the wiring and clean up
  7. Prevent squirrels from coming back
  8. When to call a professional
  9. Summary

Squirrels in an attic are a common problem. They can chew wiring, insulation, and wood, and their droppings and urine create odor and cleaning hazards. The most humane approach is usually a one-way exit door over the entry point, which lets squirrels leave on their own, rather than trapping them inside. Check for babies before you do anything else, because removing a mother can leave young to die inside the walls.

Check for babies first

Squirrels often have young more than once a year, with births commonly in spring and summer. Young squirrels cannot leave the nest for several weeks after birth.

Before you exclude or trap anything:

  • Listen for scratching, squeaking, or chewing in the same spot, especially early or late in the day.
  • Look for a nest of shredded material, usually in an insulated area.
  • If you go into the space, use a flashlight and wear a mask, since droppings and dust are common.
  • If you find young that cannot move well or are not fully furred, don’t seal or trap anything. Call a wildlife rehabilitator.

Some wildlife guides suggest placing young outside near the exit so the mother can retrieve them. This is a judgment call, so ask a wildlife rehabilitator first, especially if the young are very small.

Find the entry points

Squirrels usually get in through gaps they can chew. Common ones include:

  • Chewed or damaged roof vents and soffits
  • Rotted fascia boards
  • Gaps where the roof meets a wall
  • Damaged gable vents, dryer vents, or pipe openings

Look for gnaw marks, fur, droppings, and dirt rubs at the entry point. Watch the outside during the day, since squirrels are most active in daylight. Squirrels can chew wood, vinyl, and soft materials, so use steel mesh and metal flashing for repairs.

Method 1: One-way exit door (usually the best option)

A one-way exit door is a spring-loaded flap that fits over an active opening. Squirrels can push out through it, but the flap stops them from getting back in.

  1. Confirm there are no babies in the space before you fit the door.
  2. Mount the door securely over the main entry hole, and check that it moves freely in one direction.
  3. Leave it in place for several days, and check it each day.
  4. Once you are sure no squirrels are left, with no sounds and no fresh droppings, remove the door and seal the hole.

For sealing, use heavy-gauge steel mesh or sheet metal fixed in place, then seal the edges with an exterior-grade sealant. Check every other possible entry point too, since squirrels will find any gap you missed.

Don’t seal a hole while squirrels may still be inside. A squirrel trapped in the walls can die there, causing odor and damage.

Method 2: Live cage traps

Use a live cage trap when exclusion isn’t practical, or when a squirrel is trapped inside the space.

  • Choose a trap sized for squirrels.
  • Place it on level ground along a runway where you can see droppings or tracks.
  • Bait it with a small amount of peanut butter or unsalted nuts.
  • Partly cover the trap for shelter.
  • Check it at least once a day, and more often in heat, cold, or rain.

Relocation rules are a common problem. Many states and provinces restrict moving wildlife, and some require a permit. Depending on local rules, a trapped squirrel may need to be released on the property or handled by a licensed operator. Check with your wildlife agency before you release anything, and don’t move a squirrel to another area unless you know that is allowed.

Avoid poisons and glue traps

  • Rodent poisons can kill squirrels inside walls, causing odor and damage. They can also poison predators and pets that eat a poisoned animal.
  • Glue traps cause prolonged suffering and are widely regarded as inhumane.

Check the wiring and clean up

Squirrels chew wires, which can create a fire hazard. After removal, look for damaged wiring, and have an electrician inspect any chewed cable before you restore power to that section.

Droppings and nesting material can carry germs. Wear gloves and a mask. Lightly wet droppings before you clean them, rather than sweeping or vacuuming dry material, which can stir up dust. Dispose of nesting material according to your local rules.

Prevent squirrels from coming back

  • Trim branches that touch or overhang the roof, since squirrels can jump from trees.
  • Cover attic and roof vents with metal mesh.
  • Check the roof and eaves each year, especially after storms.
  • Reduce food sources near the house, such as bird feeders and spilled seed.

When to call a professional

Consider a licensed wildlife control operator if:

  • You can’t safely reach the attic
  • You find a nest with babies and can’t reach a rehabilitator
  • The damage is severe, including wiring damage
  • Squirrels keep returning after you have sealed the house

Summary

Humane attic squirrel removal starts with checking for babies, then uses a one-way exit door over the entry point. Seal every gap after the squirrels have left, and use live traps only where local rules allow. Avoid poisons and glue traps, and check wiring before you restore power. For release rules, see trap and release practices. Small native animals can use the same kinds of gaps, so see how to trap antechinus in your house for more on sealing.

The complete guide to nuisance animal trapping

Trap and Release: Humane Live-Trapping Practices
Read the guide

Keep exploring

Guides from other topics

All topics →